REXROTH S6A3.0 Valves

L:135 mm; T min.:-40 °C; A2:24.5 mm; A1:10 mm; B:32 mm; J:110 mm; Weight:1.18 kg; A:21 mm; G:M6x1; Designation of housing:FCE207-;

d1:62 mm; N:16mm; Weight:2.44 kg; Z:57.7 mm; B:22 mm; C0:22.4 kN; Designation of bearing:LK209G2H; G:M6x1; d:45 mm; Designation of open end cover:SCO209-45;

Expansion Type:Non-Expansion; Housing Material:Cast Iron; Ship Weight:1.35 LB; Bearing Outer Ring Material:Steel; Bearing Series:204 Series; Bearing Insert Material:Steel; Anti-Rotation Pin:Yes; Retainer Type:Std Retainer; Manufacturing Plant Location:Rogersville, TN; Flinger Material:Steel;

Designation of bearing:UC205G2L3; T min.:-20 °C; S:14.3 mm; A2:35 mm; H:70 mm; E:22 mm; A:28 mm; G:R1/8"; T max.:100 °C; L3:38 mm;

C1:1.6 mm; Characteristic rolling element frequency, BSF:6.18 Hz; Nlim (grease):20,000 rpm; Dw:1.5 mm; Inner ring reference:IR5X8X12; C:10 mm; Min operating temperature, Tmin:-20 °C; Mass:0.03 kg; D:12 mm; Characteristic inner ring frequency, BPFI:6.95 Hz;

L:190 mm; B:22 mm; Adapter sleeve reference:HLK2309; G:M6x1; Designation of bearing:LK209G2H; d:45 mm; J:146 mm; A:54 mm; H2:108 mm; C:33.2 kN;

d:45 mm; Radial clearance class:CN; Static load, C0:34 kN; Dynamic load, C:31 kN; ra max:1 mm; Fatigue limit load, Cu:4.15 kN; Da max:70 mm; D:75 mm; rs min:1 mm; d1:55.5 mm;

da:317 mm; d:300 mm; Da:339 mm; Dynamic Load Rating:100.6 kN; Static Load Rating:246.5 kN; Oil Holes:2.5 mm; D:360 mm; B:25 mm; Radius:2.5 mm;

B:65.1 mm; C:93.86 kN; d1:97 mm; T min.:-40 °C; A1:22 mm; Designation of housing:F313-; Designation of bearing:EX313G2T04; T max.:100 °C; L:208 mm; C0:60.5 kN;

G:3/8-24UNF; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; B:51.6 mm; D:90 mm; C1:6.5 mm; d:44.45 mm; C:23 mm; r:1.2; C0:23.2 kN;

T max.:100 °C; C0:7.88 kN; L:97 mm; H:89 mm; s1:13.5 mm; N:19mm; A2:24 mm; S:7.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:US205-15G2;

Anti-Rotation Pin:Yes; Brand:Baldor-Dodge; Bearing Inner Ring Material:Steel; Ball Material:Steel; d:1.1875 in; Shaft Attachment (2):Set Screw; Grease Type:Unirex N2; Housing Coating:Powder Coat; Bearing Bore Shape:Round; Retainer Type:Std Retainer;

C0:96.5 kN; Designation of bearing:EX317-52G2T04; G:M10x1; Designation of housing:F317-; A1:27 mm; A:74 mm; Recommended tightening torque for set screw:54.5 Nm; B:84.1 mm; d:82.55 mm; T max.:100 °C;

Fatigue limit load, Cu:6.7 kN; Da max:56.5 mm; Characteristic rolling element frequency, BSF:5.81 Hz; d:30 mm; db min:35.5 mm; Ca min:2.5 mm; Nref:7,000 rpm; rs min:1 mm; Characteristic cage frequency, FTF:0.42 Hz; Characteristic outer ring frequency, BPF0:6.7 Hz;

C:12.8 kN; L1:48 mm; Designation of housing:PH204-; N:13mm; C0:6.65 kN; A1:22 mm; T max.:100 °C; d:20 mm; H2:101 mm; s1:24.2 mm;